Filter
Top Products
show interfaces port-channel — displays information on configured Port Channel
groups.
show config
Display the current configuration of the selected LAG.
S4820T
Syntax
show config
Command
Modes
INTERFACE PORTCHANNEL
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0
Introduced on the E-Series.
Example
Dell(conf-if-po-1)#show config
!
interface Port-channel 1
no ip address
shutdown
Dell(conf-if-po-1)#
show interfaces port-channel
Display information on configured Port Channel groups.
S4820T
Syntax
show interfaces port-channel [channel-number] [brief]
Parameters
channel-
number
For a Port Channel interface, enter the keyword port-
channel then a number. For the C-Series and S-Series, the
range is from 1 to 128.
Interfaces
867