Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
Usage
Information
By default, the Enable password is used. If you configure aaa authentication
enable default, Dell Networking OS uses the methods defined for Enable
access
instead.
Methods configured with the aaa authentication enable command are
evaluated in the order they are configured. If authentication fails using the primary
method, Dell Networking OS employs the second method (or third method, if
necessary) automatically. For example, if the TACACS+ server is reachable, but the
server key is invalid, Dell Networking OS proceeds to the next authentication
method. The TACACS+ is incorrect, but the user is still authenticated by the
secondary method.
Related
Commands
enable password — changes the password for the enable command.
login authentication — enables AAA login authentication on the terminal lines.
password — creates a password.
radius-server host — specifies a RADIUS server host.
tacacs-server host — specifies a TACACS+ server host.
aaa authentication login
Configure AAA Authentication method lists for user access to EXEC mode (Enable log-in).
S4820T
Syntax
aaa authentication login {method-list-name | default} method
[... method4]
To return to the default setting, use the no aaa authentication login
{method-list-name | default} command.
Parameters
method-list-
name
Enter a text string (up to 16 characters long) as the name of a
user-configured method list that can be applied to different
lines.
default Enter the keyword default to specify that the method list
specified is the default method for all terminal lines.
method Enter one of the following methods:
enable: use the password the enable password
command defines in CONFIGURATION mode. Not
available if role-only is in use.
line: use the password the password command defines
in LINE mode. Not available if role-only is in use.
local: use the password for the userid contained in the
local password database.
1588
Security