Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
show ip bgp ipv4 extcommunity-list
To display the IPv4 routes matching the extended community list name, use this feature.
Syntax
show ip bgp [ipv4 [multicast | unicast] | ipv6 unicast]
extcommunity-list name
Parameters
multicast Enter the keyword multicast to display the multicast route
information.
unicast Enter the keyword unicast to display the unicast route
information.
ipv6 unicast Enter the keywords ipv6 unicast to display the IPv6
unicast route information.
name (OPTIONAL) Enter the name of the extcommunity-list.
Defaults none
Command
Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced on the E-Series.
Usage
Information
If there is a type or sub-type that is not well-known, it is displayed
as:TTSS:XX:YYYY.
Where TT is type, SS is sub-type displayed in hexadecimal format, XX:YYYY is the
value divided into 2–byte and 4-byte values in decimal format. This format is
consistent with other vendors.
For example, if the extended community has type 0x04, sub-type 0x05, value 0x20
00 00 00 10 00, it displays as:0x0405:8192:4096.
Non-transitive extended communities are marked with an asterisk.
Border Gateway Protocol
531