Filter
Top Products
[destination ip address | ipv6 address {mask} {destination-port
number}] command.
Parameters
seq-num Enter the match command sequence number.
sourceip-
address | ipv6
address
Enter the keyword source then the IPv4 or IPv6 address for
the source.
mask Enter the mask prefix length in /nn format.
source-port
number
Enter the source port number.
destination-
port number
Enter the destination port number.
Defaults none
Command
Modes
CONFIG-CRYPTO-POLICY
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
Usage
Information
• IPv4 addresses support only -/32 mask types.
• IPv6 addresses support only -/128 mask types.
• Configure match for bi-directional traffic for optimal routing.
• Only TCP is supported.
Example
match 0 tcp a::1 /128 0 a::2 /128 23
match 1 tcp a::1 /128 23 a::2 /128 0
match 2 tcp a::1 /128 0 a::2 /128 21
match 3 tcp a::1 /128 21 a::2 /128 0
match 4 tcp 1.1.1.1 /32 0 1.1.1.2 /32 23
match 5 tcp 1.1.1.1 /32 23 1.1.1.2 /32 0
match 6 tcp 1.1.1.1 /32 0 1.1.1.2 /32 21
match 7 tcp 1.1.1.1 /32 21 1.1.1.2 /32 0
886
Internet Protocol Security (IPSec)