Filter
Top Products
filtering options to match BGP, the BGP route is not leaked as that route is not
active in the Source VRF.
Related
Commands
ipv6 route-import – imports IPv6 routes from another VRF.
ipv6 route-import
Imports IPv6 routes that are leaked by another VRF using the tag specified by that VRF during export of
these routes.
Syntax
ipv6 route-import tag [route-map-name]
Parameters
route-import Enter the keyword route-import to import IPv6 routes into
the VRF.
tag Enter a tag (ASN number) to specify an import route target
for importing routes from another VRF. To import leaked
routes from another VRF, you must use the same ASN
number that is specified as the export route target at the
source VRF.
route-map-
name
Enter the name of the route-map to filter the imported
routes.
NOTE: You must use the route-map attribute while
importing routes from the global RTM. Route-maps
enable you to filter routes at the import end based on
the matching criteria that you define in the route-map.
Defaults N/A
Command
Modes
VRF MODE
CONFIGURATION
Command
History
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, and Z9500.
Usage
Information
It is possible to configure multiple import conditions per VRF depending on the
exporting VRF.
Virtual Routing and Forwarding (VRF)
1879