Filter
Top Products
fip-snooping max-sessions-per-enodemac
Configure the maximum session limit per ENode MAC address.
S4820T
Syntax
fip-snooping max—sessions—per—enode—mac max-sessions-value
To return the configured maximum sessions to the default value, use the no fip-
snooping max—sessions—per—enode—mac command.
Parameters
max-sessions-
value
Enter the maximum number of sessions allowed per ENode
MAC address. The range is from 1 to 64.
Defaults 32
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
9.2(0.2) Introduced on the S4810 and S4820T.
fip-snooping port-mode fcf
Configure the port for bridge-to-FCF links.
S4820T
Syntax
fip-snooping port-mode fcf
To disable the bridge-to-FCF link on a port, use the no fip-snooping port-
mode fcf
command.
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Reference Guide.
708
FIP Snooping