Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
none: no authentication. Not available if role-only is in
use.
radius: use the RADIUS servers configured with the
radius-server host command.
tacacs+: use the TACACS+ servers configured with the
tacacs-server host command.
... method4 (OPTIONAL) Enter up to four additional methods. In the
event of a “no response” from the first method, the system
applies the next configured method (up to four configured
methods).
Defaults Not configured (that is, no authentication is performed).
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T,
S4810, MXL
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.0 Introduced on the E-Series.
Usage
Information
By default, the locally configured username password is used. If you configure aaa
authentication login default, Dell Networking OS uses the methods this
command defines for login instead.
Methods configured with the aaa authentication login command are
evaluated in the order they are configured. If users encounter an error with the first
method listed, Dell Networking OS applies the next method configured. If users fail
the first method listed, no other methods are applied. The only exception is the
local method. If the user’s name is not listed in the local database, the next method
is applied. If the correct user name/password combination is not entered, the user
is not allowed access to the switch.
Security
1589