Filter
Top Products
Term heading Description heading
The different hash algorithms are based on the number of ECMP group members
and packet values. The default hash algorithm yields the most balanced results in
various test scenarios, but if the default algorithm does not provide satisfactory
distribution of traffic, use this command to designate another algorithm.
When a member leaves or is added to the ECMP group, the hash algorithm is
recalculated to balance traffic across the members.
hash-algorithm seed
Select the seed value for the ECMP, LAG, and NH hashing algorithm.
S4820T
Syntax
hash-algorithm seed value [stack-unitslot/port] [port-set
number]
Parameters
seed value Enter the keyword seed then the seed value. The range is
from 0 to 2,147,483,646.
stack–unit slot/
port
Enter the keyword stack-unit then the slot/port number.
The range is from 0 to 11.
port-set
number
Enter the keyword port-set then the port-pipe number.
The value is 0.
Defaults None
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
Equal Cost Multi-Path (ECMP)
689