Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
The following Example displays a group named ngroup. The ngroup has a security
model of version 3 (v3) with authentication (auth), the read and notify name is
nview with no write view name specified, and finally the row status is active.
Example
Dell#show snmp group
groupname: v1v2creadg security model: v1
readview : v1v2cdefault writeview: no write view specified
notifyview: v1v2cdefault context: no context specified
row status: active
Dell#
Related
Commands
snmp-server group — configures an SNMP server group.
show snmp user
Display the information configured on each SNMP user name.
Syntax
show snmp user
Command
Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Simple Network Management Protocol (SNMP) and Syslog
1695