Filter
Top Products
bmp-boot Enter the keyword bmp-boot to boot the system, when the
you are not sure about the partition that contains image
from DHCP offer.
NOTE: In normal-reload, this keyword is not enabled.
Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced the support for bmp-boot on the S-Series and
Z-Series switches.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage
Information
To display these changes in the show bootvar command output, save the
running configuration to the startup configuration (using the
copy command) and
reload system.
The keyword bmp-boot is used only when the device boots up from BMP. In case
of industrial standard upgraded device, the Dell networking OS stores the image
partition upgraded from the DHCP offer in
bmp-boot variable.
cd
Change to a different working directory.
Syntax
cd directory
Parameters
directory (OPTIONAL) Enter one of the following:
• flash: (internal Flash) or any sub-directory
• nfsmount://<mount-point>/filepath: NFS
mounted path
File Management
65