Filter
Top Products
show ipv6 flowlabel-zero
Display the flow label zero setting.
S4820T
Syntax
show ipv6 flowlabel-zero
Default Disabled
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related
Commands
ipv6 nd dad attempts — Configure system to set the flow label field in the packets
to zero.
show ipv6 interface
Display the status of interfaces configured for IPv6.
S4820T
Syntax
show ipv6 interface interface [brief] [configured] [loopback
interface-number] [managementethernet slot/port] [port-channel
number] [stack-unit id] [tengigabitethernet slot | slot/port]
[fortyGigE slot | slot/port] [tunnel tunnel-id] [vlan vlan-id]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
IPv6 Basics
1005