Filter
Top Products
multi-topology transition
set-overload-bit
spf-interval level-1 100 15 20
spf-interval level-2 120 20 25
exit-address-family
show isis database
Display the IS-IS link state database.
S4820T
Syntax
show isis [vrf vrf-name] database [level-1 | level-2] [local]
[detail | summary] [system-id] [lspid]
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the
VRF to display IS-IS link state database corresponding to that
VRF.
NOTE: If you do not specify this option, the IS-IS link
state database corresponding to the default VRF are
displayed.
level-1 (OPTIONAL) Displays the Level 1 IS-IS link-state database.
level-2 (OPTIONAL) Displays the Level 2 IS-IS link-state database.
local (OPTIONAL) Displays local link-state database information.
detail (OPTIONAL) Displays the detailed link-state database
information of each LSP when specified. If not specified, a
summary displays.
summary (OPTIONAL) Displays the summary of link-state database
information when specified.
lspid (OPTIONAL) Display only the specified LSP.
system-id (OPTIONAL) Displays the link-state database for system-id.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1082
Intermediate System to Intermediate System (IS-IS)