Filter
Top Products
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.4 Output expanded to include Piece Part ID (PPID) and eSR4
optics.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced this version of the command for S-Series. S-
Series output differs from E-Series.
Usage
Information
If there are no fiber ports in the unit, just the header under show inventory media
displays. If there are fiber ports but no optics inserted, the output displays Media
not present or accessible.
Example
(S6000)
Dell#show inventory
System Type : S6000
System Mode : 1.0
Software Version : 9-4(0-168)
Unit Type Serial Number Part Number
Rev Piece Part ID Rev Svc Tag Exprs Svc Code
---------------------------------------------------------------
------------------------------------------------------
* 0 S6000-01-FE-32T NA 08YWFG A00
CN-08YWFG-28298-39Q-0015 A00 24N1VS1 463 414 838 5
0 S6000-PWR-AC NA 0T9FNW A00
CN-0T9FNW-28298-39Q-0005 A00 NA NA
0 S6000-FAN NA 0MGDH8 A00
CN-0MGDH8-28298-39Q-0009 A00 NA NA
0 S6000-FAN NA 0MGDH8 A00
CN-0MGDH8-28298-39Q-0007 A00 NA NA
0 S6000-FAN NA 0MGDH8 A00
CN-0MGDH8-28298-39Q-0008 A00 NA NA
* - Management Unit
Software Protocol Configured
--------------------------------------------------------------
LLDP
150
Control and Monitoring