Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
Field Description
flags List the flags to define the entries:
S = PIM Sparse Mode
C = directly connected
L = local to the multicast group
P = route was pruned
R = the forwarding entry is pointing toward the RP
F = Dell Networking OS is registering this entry for a
multicast source
T = packets were received via Shortest Tree Path
J = first packet from the last hop router is received and
the entry is ready to switch to SPT
K=acknowledge pending state
Incoming
interface
Displays the reverse path forwarding (RPF) interface towards
the RP/ source.
RPF neighbor Displays the next hop from this interface towards the RP/
source.
Outgoing
interface list:
Lists the interfaces that meet one of the following criteria:
a directly connect member of the Group
statically configured member of the Group
received a (*,G) Join message
Example
Dell#show ip pim snooping tib
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
SGR-P - (S,G,R) Prune
Timers: Uptime/Expires
* : Inherited port
(*, 225.1.2.1), uptime 00:00:01, expires 00:02:59, RP
165.87.70.1, flags: J
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
TenGigabitEthernet 2/11 RPF 165.87.32.2 00:00:01/00:02:59
TenGigabitEthernet 2/13 Upstream Port -/-
Dell#show ip pim snooping tib vlan 2 225.1.2.1 165.87.1.7
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
SGR-P - (S,G,R) Prune
Timers: Uptime/Expires
* : Inherited port
(165.87.1.7, 225.1.2.1), uptime 00:00:08, expires 00:02:52,
flags: j
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
TenGigabitEthernet 2/11 Upstream Port -/-
1418
PIM-Sparse Mode (PIM-SM)