Filter
Top Products
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series TeraScale.
clear ipv6 route
Clear (refresh) all or a specific route from the IPv6 routing table.
S4820T
Syntax
clear ipv6 route [vrf vrf-name] {* | ipv6-address prefix-
length}
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the
VRF to clear the IPv6 routes corresponding to that VRF.
* Enter the * to clear (refresh) all routes from the IPv6 routing
table.
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
986
IPv6 Basics