Filter
Top Products
To remove the threshold values, use the no threshold min number max
number command.
Parameters
min number Enter the keyword min then the minimum threshold number
for the WRED profile. The range is from 1 to 9360.
max-drop-
probability
number
Enter the keyword max-drop-probability followed by the
maximum number of packets for the WRED profile. The
range is from 0 to 100 KB
Defaults none
Command
Modes
CONFIGURATION (config-wred)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Usage
Information
To configure the minimum and maximum threshold values for user-defined
profiles, use this command. Additionally, to modify the minimum and maximum
threshold values for the pre-defined WRED profiles, use this command. If you
delete the threshold values of the pre-defined WRED profiles, the profiles revert to
their original default values.
Pre-Defined WRED
Profile Name
Minimum
Threshold
Maximum
Threshold
wred_drop 0 0
100
wred_ten_y 467 4671 100
wred_ten_g 467 4671 50
wred_fortyg_y 467 4671 50
wred_fortyg_g 467 4671 25
Related
Commands
wred-profile — creates a WRED profile.
1500
Quality of Service (QoS)