Filter
Top Products
Version Description
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
Usage
Information
If you configure mac-learn-limit and the sticky MAC feature is enabled,
dynamically learned MAC addresses are converted to sticky for that port. Any new
MAC address that is learned also becomes sticky for that port.
Related
Commands
show mac learning-limit — displays the details of the mac learning-limit.
mac learning-limit station-move-violation
Specify the actions for a station move violation.
S4820T
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-
violation command, then the configured keyword.
Parameters
log Enter the keyword log to generate a syslog message on a
station move violation.
shutdown-both Enter the keyword shutdown to shut down both the original
and offending interface and generate a syslog message.
shutdown-
offending
Enter the keywords shutdown-offending to shut down
the offending interface and generate a syslog message.
shutdown-
original
Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Defaults none
Command
Modes
INTERFACE (conf-if-interface-slot/port)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Layer 2
1113