Filter
Top Products
Parameters
connected Enter the keyword connected to redistribute active routes
into IS-IS.
rip Enter the keyword rip to redistribute RIP routes into IS-IS.
static Enter the keyword static to redistribute user-configured
routes into IS-IS.
metric metric-
value
(OPTIONAL) Assign a value to the redistributed route. The
range is from 0 to 16777215. The default is 0. Use a value that
is consistent with the destination protocol.
metric-type
{external |
internal}
(OPTIONAL) The external link type associated with the
default route advertised into a routing domain. Specify one
of the following:
• external
• internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-
IS as Level 1 routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-
IS as Level-1-2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-
IS as Level 2 routes. This setting is the default.
route-map
map-name
(OPTIONAL) If you do not enter the route-map argument, all
routes are redistributed. If a map-name value is not specified,
no routes are imported.
Defaults
• metric metric-value = 0
• metric-type= internal; level-2
Command
Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
1074
Intermediate System to Intermediate System (IS-IS)