Filter
Top Products
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Added IPv6 ISIS support.
6.3.1.0 Version 6.3.1.0 Introduced
Usage
Information
You cannot disable leaking from Level 1 to Level 2. Also, you cannot enable leaking
from Level 2 to Level 1. However, you can regulate the rate flow from one level to
another using an IP Prefix list. If you do not configure the IP Prefix list, all Level 1
routes are leaked.
You can find more information in IETF RFC 2966, Domain-wide Prefix Distribution
with Two-Level IS-IS.
area-password
Configure a hash message authentication code (HMAC) password for an area.
Syntax
area-password [hmac-md5 | encryption-type] password
To delete a password, use the no area-password command.
Parameters
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the
password.
encryption-
type
(OPTIONAL) Enter 7 to encrypt the password using DES.
password Enter a 1 to 16-character length alphanumeric string to
prevent unauthorized access or incorrect routing
information corrupting the link state database. The password
is processed as plain text, which only provides limited
security.
1026
Intermediate System to Intermediate System (IS-IS)