Dell 9.8(0.0) Network Router User Manual


  Open as PDF
of 1910
 
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
For the Management interface on the stack-unit, enter
the keyword ManagementEthernet then the slot/port
information. The slot range is from 0 to 1. The port range
is 0.
For a port channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
ip ip-address
mask
(OPTIONAL) Enter the keyword ip then an IP address in the
dotted decimal format. Enter the optional IP address mask in
the slash prefix format (/ x).
inspection Enter the keyword inspection with one of the following
keywords to view ARP entries:
database — view a list of ARP entries learned using DAI
statistics — view DAI statistics
macaddress
mac-address
mask
(OPTIONAL) Enter the keyword macaddress then a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional
MAC address mask in nn:nn:nn:nn:nn format also.
static (OPTIONAL) Enter the keyword static to view entries
entered manually.
retries (OPTIONAL) Enter the keyword retries to show the
number of ARP retries before a 20–second back off.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic
entries.
summary (OPTIONAL) Enter the keyword summary to view a summary
of ARP entries.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF and added usage information for the
clear arp-cache command.
938
IPv4 Routing