Filter
Top Products
41
Policy-based Routing (PBR)
Policy-based routing (PBR) allows you to apply routing policies to specific interfaces. To enable PBR,
create a redirect list and apply it to the interface. After the redirect list is applied to the interface, all traffic
passing through the interface is subject to the rules defined in the redirect list. PBR is supported by the
Dell Networking Operating System (OS).
You can apply PBR to physical interfaces and logical interfaces (such as a link aggregation group [LAG] or
virtual local area network [VLAN]). Trace lists and redirect lists do not function correctly when you
configure both in the same configuration.
NOTE: Apply PBR to Layer 3 interfaces only.
NOTE: For more information , refer to Content Addressable Memory (CAM) chapter.
description
Add a description to this redirect list.
S4820T
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the IP redirect list (16
characters maximum).
Defaults none
Command
Modes
REDIRECT-LIST
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
8.4.2.1 Introduced on the C-Series and S-Series.
1380
Policy-based Routing (PBR)