Renesas HD6417641 Network Card User Manual


  Open as PDF
of 1036
 
Section 11 User Break Controller (UBC)
Rev. 4.00 Sep. 14, 2005 Page 263 of 982
REJ09B0023-0400
After an instruction with and address H'00037226 is executed, a user break occurs before an
instruction with and address H'0003722E is executed.
(Example 1-3)
Register specifications
BARA = H'00027128, BAMRA = H'00000000, BBRA = H'005A, BARB = H'00031415,
BAMRB = H'00000000, BBRB = H'0054, BDRB = H'00000000, BDMRB = H'00000000,
BRCR = H'00000000
Specified conditions: Channel A/channel B independent mode
<Channel A>
Address: H'00027128, Address mask: H'00000000
Bus cycle: L bus/instruction fetch (before instruction execution)/write/word
<Channel B>
Address: H'00031415, Address mask: H'00000000
Data: H'00000000, Data mask: H'00000000
Bus cycle: L bus/instruction fetch (before instruction execution)/read (operand size is not
included in the condition)
On channel A, no user break occurs since instruction fetch is not a write cycle. On channel B,
no user break occurs since instruction fetch is performed for an even address.
(Example 1-4)
Register specifications
BARA = H'00037226, BAMRA = H'00000000, BBRA = H'005A, BARB = H'0003722E,
BAMRB = H'00000000, BBRB = H'0056, BDRB = H'00000000, BDMRB = H'00000000,
BRCR = H'00000008
Specified conditions: Channel A/channel B sequential mode
<Channel A>
Address: H'00037226, Address mask: H'00000000
Bus cycle: L bus/instruction fetch (before instruction execution)/write/word
<Channel B>
Address: H'0003722E, Address mask: H'00000000
Data: H'00000000, Data mask: H'00000000
Bus cycle: L bus/instruction fetch (before instruction execution)/read/word
Since instruction fetch is not a write cycle on channel A, a sequential condition does not
match. Therefore, no user break occurs.