Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
104
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ The maximum number of Resources for each model
This section explains Numerical Resource settings.
Procedure
1 Click [Assign Numerical Resource] under the Resource Domain Management in
the [Configuration] menu.
→ The [Assign Numerical Resource (Initial)] screen appears.
Model
Logical
Volume
Host WWN iSCSI Host
Affinity
Group
Host
Response
Eco-mode
Schedule
ETERNUS DX410 2048 256 256 256 255 64
ETERNUS DX440 4096 256 256 256 255 64
ETERNUS DX8100 4096 256 256 256 255 64
ETERNUS DX8400 16384 1024 1024 512 255 64
ETERNUS DX8700 16384 1024 1024 512 255 64
The [Assign Numerical Resource] menu is not displayed in the following
conditions:
• When the current user account does not support the [Assign Numerical
Resource] function
• When no domains are registered in the ETERNUS DX400/DX8000
series
• When logged on using a Resource Domain Administrator account
• Set the maximum number of Resources using the [Assign Numerical
Resource] function, and assign the Resource to the domain using the
[Assign Resources] function. The maximum number of Resources
specified in the [Assign Numerical Resource] function determines the
upper limit of the number of Resources which can be assigned to the
domain.
• The Assignable Resources (the maximum number of Resources) for
"Host WWN", "iSCSI Host", and "Affinity Group" can be specified even
when the Host-Affinity function is not used.
• The Assignable Resources for "Eco-mode Schedule" can be specified
even when the Eco-mode is inactive.