Fujitsu DX400 Computer Drive User Manual


 
Chapter 6 Settings Menu
> 6.8 Others
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
600
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
For security, when Storage Foundation Software ETERNUS SF
(such as ETERNUS SF Storage Cruiser) is not used, select
[Disable] for the "Maintenance Port" and the "Maintenance
Secure Port" in the Service Settings.
When using to the Storage Foundation Software ETERNUS SF
via the "Maintenance Secure Port", Storage Foundation Software
ETERNUS SF requires functions to send and receive encrypted
communication data.
When clicking the [Set] button in the following conditions, an error
screen appears.
- When entering characters other than numeric characters, or a
value that exceeds the maximum value to the field of the
setting item
- When required items are not set
- When settings are not 0 Byte (not set) or 4 Byte (set) in each
item
- When the Primary DNS has not been set and Secondary DNS
has been set
- When the DNS is outside of the subnet for the IP Address and
the gateway has not been set
- When either the Network Address or the Subnet Mask has
been set for the IP Access Settings
- When the Network Address of IP Access Settings has been
set but the Gateway is not set
- When the IP Address, Gateway, DNS, or the Network Address
of the IP Access Settings is local host address
- When the IP Address, Gateway, DNS, or the Network Address
of the IP Access Settings is not Class A, B, or C
- When "255.255.255.255" or "0.0.0.0" is set as a subnet mask
- When IP Address is the same as the Network Address or the
broadcast address
- When the IP Address of the REMCS Port is the same as the
IP Address of USER Port
- When the IP Address of the REMCS Port and the IP Address
of the USER Port are in the same subnet
- When the broadcast address of the REMCS port and Gateway
are the same
- When the broadcast address of the REMCS port and DNS
(Primary DNS and/or Secondary DNS) are the same
- When the Gateway has been set, and the IP Address and the
Gateway are the same
- When the Gateway has been set, and the IP Address and the
Gateway are not in the same subnet
- When the Network Address of IP Access Settings and the IP
Address of REMCS Port are in the same subnet
- When the Network Address of IP Access Settings and the IP
Address for [Set IP Address for USER Port] are the same