Filter
Top Products
Appendix A Screen Details
> A.18 Set CA Parameters
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
741
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.18 Set CA Parameters
A.18.1 Set CA Parameters (FC-CA Detailed Settings) Screen
Set the detailed information of the FC-CA Port selected on the [Set CA Parameters (Initial)]
screen. The installation location of the FC-CA Port is displayed on the screen as [CM#x CA#y
Port#z].
When it is necessary to convert a Host Response from the ETERNUS DX400/DX8000 series to
the host, the Host Response must be assigned to each Host World Wide Name or each FC-CA
Port. A target to which a Host Response is assigned varies depending on [ON/OFF] of the Host
Affinity function. Check the [Affinity Mode] of the FC-CA Port.
• When the Host-Affinity function is [ON (Enabled)]
Set Host Response for each host World Wide Name using the [Set Host World Wide
Name(s)] function.
• When the Host-Affinity function is [OFF (Disabled)]
Set Host Response for each FC-CA Port using this function. For details, refer to the [Affinity
Mode] description in the following table.
When Resource Domains are registered in the ETERNUS DX400/DX8000 series, the Host
Responses that can be set differ depending on the current user account.
• When logged on using a Total Administrator account, all the Host Responses that are
assigned to Resource Domains can be set.
• When logged on using a Resource Domain Administrator account, only the Host Responses
that are assigned to the relevant Resource Domain, and only the Host Responses that are
assigned to the Shared Resource, can be set.
If a Host Response is deleted using the [Set Host Response] function, the
Host Response of each FC-CA Port associated with the deleted Host
Response is changed to the [Host Response No.: Default].
• If appropriate Host Response is not registered in the ETERNUS DX400/
DX8000 series, register a Host Response using the [Set Host
Response] function.
• For details about the selection guide for each item, refer to the
"ETERNUS DX Disk storage systems Server Connection Guide".