Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
244
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
This section explains procedures to delete Hot Spare.
Procedure
1 Click [Delete Hot Spare] under the RAID Management (or Thin Provisioning
Management
) in the [Configuration] menu.
→ The [Delete Hot Spare (Initial)] screen appears.
2 Select the hot spare disk(s) to be deleted, and click the [Set] button.
Click the [Move] button to display the Expansion Rack screen. Select the hot spare disk(s)
in the Expansion Rack using the same procedure as for the Base Rack.
→ The [Delete Hot Spare (Check Setting)] screen appears.
If there is no hot spare disk available for deletion, a message to that
effect appears. Click the [OK] button to return to the [Menu] screen.
When the [Set] button is clicked without selecting a hot spare disk to
be deleted, an error screen appears.