Filter
Top Products
Appendix A Screen Details
> A.3 RAID Group List
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
673
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.3 RAID Group List
A.3.1 RAID Group List (Initial) Screen
When Resource Domains are registered in the ETERNUS DX400/DX8000 series, the displayed
RAID Groups differ depending on the current user account.
When logged on using a Total Administrator account, all the RAID Groups that are assigned to
Resource Domains are displayed. When logged on using a Resource Domain Administrator
account, only the RAID Groups that are assigned to the
relevant Resource Domain, and only the
RAID Groups that are
assigned to the Shared Resource, are displayed.
When Resource Domains are not registered, all the RAID Groups registered in the ETERNUS
DX400/DX8000 series are displayed.
■ RAID Group List
● Displayed contents
• RAID Group No.
The RAID Group number is displayed in 3-digit hexadecimal.
When the [RAID Group No.] link is clicked, the installation status of the disks which configure
the RAID Group is displayed.
• RAID Group Name
The RAID Group name is displayed within 16 characters.
If a RAID Group name is not specified, the field is blank.
• RAID Level
The RAID level (RAID0, RAID1, RAID1+0, RAID5, or RAID6) of the RAID Group is displayed.
• Status
The status of the RAID Group is displayed.
When the RAID Group is in Rebuild/Copyback process (when the status of the RAID Group is
[Exposed], [Copyback], [Rebuild], [Spare in Use], [Partially Exposed Rebuild], or [Exposed
Rebuild]), the [Progress] link is displayed.
Clicking the [Progress] link enables checking the Rebuild/Copyback progress. During the
LDE, the [LDE Progress] link is displayed.
- Available
The RAID Group is in normal status
- Exposed
The RAID Group lost redundancy due to disk failure
- Copyback
Copying back from a hot spare disk to a new data disk is in progress
- Rebuild
Rebuild from failed data disk to hot spare disk is in process