Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
108
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5.1.3 Assign Resources
On this screen, assign each resource to a Resource Domain (hereinafter referred to as a
domain), or change the domain where each resource is being assigned. The target resources
are as follows.
• RAID Group
• Thin Provisioning Pool
• Host World Wide Name
• iSCSI Host
• Affinity Group
• Host Response
• Eco-mode Schedule
■ Conditions in which a RAID Group can Assign to Domain/Change Assigned Domain
• A RAID Group in which the LDE is not in progress
• A RAID Group that is not registered in the Thin Provisioning Pool
• A RAID Group that is not a working RAID Group which is created during the LDE process
(displayed "TMP" for Usage)
• A RAID Group that does not include a source or a destination Logical Volume for the RAID
Migration
• A RAID Group that does not include Logical Volumes that are concatenated to the volumes in
other RAID Groups
• When the Advanced Copy between domains is not allowed, a RAID Group that does not
include a copy source or a copy destination Logical Volume for EC
• When the Advanced Copy between domains is not allowed, a RAID Group that does not
include a copy source or a copy destination Logical Volume for OPC (including QuickOPC,
SnapOPC, and SnapOPC+)
• A RAID Group that does not include Logical Volumes (except MVV) which are being mapped
(Host-Affinity Settings)
• A RAID Group in which no Eco-mode setting is specified
• A RAID Group that is not registered as the REC Disk Buffer