Filter
Top Products
Chapter 3 Status Menu
> 3.3 RAID Group List
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
60
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3.3 RAID Group List
This screen displays the list of RAID Groups and the detailed information of each RAID Group
created in the
ETERNUS DX400/DX8000 series.
This function facilitates display of the status of each RAID Group and the Logical Volumes of
each RAID Group, aiding system administrators in their work.
The following explains procedures to display/set the RAID Group List.
• When no RAID Group is created in the ETERNUS DX400/DX8000
series, a message to that effect is displayed. Click the [OK] button to
return to the [Menu] screen.
• When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, the displayed RAID Groups differ depending on the
current user account.
- When logged on using a Total Administrator account, all the RAID
Groups that are assigned to Resource Domains are displayed.
- When logged on using a Resource Domain Administrator account,
only the RAID Groups that are assigned to the relevant Resource
Domain, and only the RAID Groups that are assigned to the Shared
Resource, are displayed.
• It is possible to check the format progress status, encrypt progress
status, and detailed information for Snap Data volume and Snap Data
Pool volume from the [RAID Group List (Volume List in the RAID
Group)] screen for the RAID Group, as in the case of the [Volume List]
function.
• Check from the [Volume List] function to display all the Logical Volumes
created in the ETERNUS DX400/DX8000 series.
• Check from the [Thin Provisioning Pool List] function to display the list of
Thin Provisioning volumes in the RAID Group that is registered in the
Thin Provisioning Pool.