Filter
Top Products
Chapter 6 Settings Menu
> 6.4 SNMP
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
499
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.4.1.1 Enable SNMP Agent Environment
This section explains how to enable the SNMP Agent environment.
Procedure
1 Click [Set SNMP Agent Environment] under the SNMP in the [Settings] menu.
→ The [Set SNMP Agent Environment (Initial)] screen appears.
Refer to "A.28.1 Set SNMP Agent Environment (Initial) Screen" (page 782) for screen
details.
2 Sets the following items and click the [Set] button.
• SNMP Function Setting
Enables the SNMP Function.
• SNMP Agent Configuration Setting
Set items related to SNMP Agent operations.
• Device Unique Information
The information unique to the device such as [Explanation], [Administrator], [Name],
and [Installation Site] can be set. This information is added to the response of SNMP
from Agent to Manager, and used by the SNMP Manager.
• Transfer Authentication Error
Specify by radio button whether or not to transfer the Trap message when an error is
detected in authentication check for the request received by SNMP Agent.
• Report abnormal status of parts while maintenance work (MIB)
Specify by radio button whether or not to report the error status of components under
maintenance to MIB.
→ The [Set SNMP Agent Environment (Setting Check)] screen appears.