Filter
Top Products
Appendix A Screen Details
> A.11 Create Logical Volume
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
720
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.11 Create Logical Volume
A.11.1 Create Logical Volume (Create Logical Volume) Screen
On this screen, specify the type and number of volume(s) to create in the selected RAID Group.
If volume(s) have been created in the selected RAID Group, a list of the volume(s) is displayed.
The volume type that can be created differs depending on the volume condition and the type of
existing volume in the RAID Group. On this screen, only the volume types that can be created
are displayed.
■ Creating Volumes (ETERNUS DX8100/DX8400/DX8700)
OK: Creation allowed
–: Creation not allowed
*1: Open volume and Snap Data volume cannot be created in a RAID Group which is set to RAID1 with
DVCF mode [ON (Enabled)] by the [Create RAID Group] function.
When "GS License" is not registered in the device, Mainframe Volumes, MVV Volumes, and MVV
Concatenated Volumes cannot be created.
There are cases where the maximum capacity Open Volume can NOT be
created, depending on the RAID Level and the amount of "free space".
Volume condition Possible volume type to be created
Open
SDV
Mainframe MVV
F6427G F6427H F6427K MVV(G) MVV(H) MVV(K)
Not Created (*1)
RAID1
DVCF:
OFF
OK OK OK OK OK OK OK
DVCF:
ON
–OKOKOKOKOKOK
RAID0
RAID1+0
RAID5
RAID6
OK––––––
Created
Open, SDV, SDPV,
Open Concatenation
OK––––––
Mainframe
F6427G – OK – – OK – –
F6427H – – OK – – OK –
F6427K – – – OK – – OK
MVV
MVV
Concate-
nation
MVV(G)–OK– –OK– –
MVV(H) – – OK – – OK –
MVV(K)
–– –OK – –OK