Fujitsu DX400 Computer Drive User Manual


 
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
179
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5 Click the [Add] button.
The [Create Logical Volume (Check Logical Volume Creation)] screen appears.
The Logical Volumes to be added are displayed with a yellow background.
Repeat Steps 4 and 5 to add more volumes.
When clicking the [Add] button in the following conditions, an error
screen appears.
Volume type and format type are not selected
Capacity, copy source capacity, number of concatenated
volumes, and number of volumes to be created are not specified
When entering characters other than numerals (between 24 and
8,388,607) for Capacity field
When the Capacity value exceeds the Free area in the
ETERNUS DX400/DX8000 series
When the additional capacity (Capacity value × Number of
volumes to be created) exceeds the Free area in the ETERNUS
DX400/DX8000 series
When entering characters other than numerals as the number of
volumes to be created
When the entered number of volumes to be created exceeds the
maximum number which can be created in one RAID Group
When the total number of volumes to be created and registered
volumes in the ETERNUS DX400/DX8000 series exceeds the
maximum number of volumes for each model
When the total number of additional volumes and specified
number of volumes exceeds 128
When the total number of additional volumes, specified number of
volumes, and the total number of volumes (total number of Open,
SDV, and TPV) that have alread y been assign ed to the Resource
Domain of the selected RAID Group exceeds the maximum
number of volumes for the relevant Resource Domain
When entering characters other than ASCII code (0x20 – 0x 7E) in
the Name field