Filter
Top Products
Appendix A Screen Details
> A.36 Set Remote Support
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
804
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ Communication Environment information
• Connection
- Connection
Select the connection type between the device and the REMCS center from the list box.
• Internet Connection (default setting)
• Internet Connection (E-Mail only)
• P-P Connection
• P-P Connection (E-Mail only)
• P-P Connection (VPN)
• P-P Connection (VPN E-Mail only)
- Use LAN Port
Select the device LAN port to use at REMCS function.
• USER (default setting)
• REMCS
• Service
- Scheduled Connection Time (Required)
Input the time of a periodic connection with the REMCS.
Numerals between 0 – 23 for Hour, and 0 – 59 for Minute can be entered.
- Scheduled Connection Period
Input the cycle of the periodic connection.
• Every day (default setting)
• Every Day Except Sunday
• Every Day Except Saturday and Sunday
• Once a Week
- Specify the Day of the Week
Select a day of the week to execute periodic connection. This is available only when a
cycle of a periodic connection is made; "Once a Week".
The default setting is "Sunday".
• Proxy Server
- Proxy Server
Input the IP address or the domain name of the PROXY server used by the REMCS
operation.
Up to 63 alphanumeric characters and symbols can be entered.
- Port No.
Input the port number that the PROXY server uses.
Numerals between 1 – 65535 can be entered.
- User Name
Input the user name when the PROXY server is used.
Up to 31 alphanumeric characters and symbols can be entered.
- Password
Input the password when the PROXY server is used.
Up to 31 alphanumeric characters and symbols can be entered.