Filter
Top Products
Appendix A Screen Details
> A.18 Set CA Parameters
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
751
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
• Affinity Mode
- Affinity Mode
Select whether the Host-Affinity function of the iSCSI-CA Port is ON (Enabled) or OFF
(Disabled) using the radio button.
• ON:
Means that the Host-Affinity function for the iSCSI-CA Port is enabled. In this case, [Set
LUN Mapping] is disabled and the Host-Affinity function is enabled for the iSCSI-CA
Port.
• OFF: (Default)
Means that the Host-Affinity function for the iSCSI-CA Port is disabled. In this case,
[Set LUN Mapping] is enabled and the Host-Affinity function is disabled for the iSCSI-
CA Port.
- Host Response
Select the appropriate Host response from the list box depending on the host connected to
the iSCSI-CA Port. When clicking the [Host Response List] link, the Host Responses that
can be set are displayed.
• Default: Name (initial status):
The [Default] Host Response is displayed. If the Host Response name is registered, its
name is also displayed in the list box.
• Host Response (Number: Name):
A Host Response identification number is displayed. If the Host Response name is
registered, its name is also displayed in the list box.
(Number = 0x01 – 0x0FF)
• Reset Scope
Set the reset scope of the iSCSI-CA Port.
The "Reset Scope" is a range where the command reset request from the host operates when
one iSCSI-CA Port is connecting with multiple hosts.
- I_T_L (Default):
Only resets (cancels) the command request from the host which sent the command reset
request.
- T_L:
Not only resets (cancels) the command request from the host which sent the command
reset request, but also resets the command reset request from all hosts connected to the
iSCSI-CA Port.
• This setting is enabled only when the [Affinity Mode] is [OFF
(Disabled)].
• When logged on using a Resource Domain Administrator
account, only the Host Responses that are assigned to the
relevant Resource Domain, and only the Host Responses that are
assigned to the Shared Resource, are displayed in the list box as
options.