Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
152
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
The procedure to change RAID Group name is described below.
Procedure
1 Click [Rename RAID Group] under the RAID Management (or Thin Provisioning
Management
) in the [Configuration] menu.
→ The [Rename RAID Group (Change)] screen appears.
2 Enter the new RAID Group name in the "Name" text box for the target RAID
Group, and click the [Set] button.
→ The [Rename RAID Group (Check)] screen appears.
When there are no RAID Groups in the ETERNUS DX400/DX8000
series, the RAID Group name cannot be changed. When a message
to that effect is displayed, click the [OK] button to r e t u r n t o t h e [ M e n u ]
screen.
If clicking the [Jump to Page], [Next], [Prev], or [Set] button in the
following conditions, an error screen appears. This function performs
the error checking for each page of the RAID Group List. RAID
Groups to be renamed are displayed with a yellow background.
• When entering characters other than ASCII code (0x20 – 0x7E)
• When entering the existing RAID Group name