Filter
Top Products
Chapter 5 Configuration Menu
> 5.3 Thin Provisioning Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
287
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
2 Select the TPV to be balanced, and click the [Set] button.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in which
the Resource Domains are registered using a Total Administrator account.)
→ The [Balance Thin Provisioning Volume (Check)] screen appears.
• If there is not enough capacity for balancing the selected TPV in
the TPP where the TPV belongs, a message t o t h a t e f f e c t i s
displayed. When balancing the target TPV, ensure that there is
enough free space in the T PP and execute the [Balance Thin
Provisioning Volume] function again. Free space in the TPP can
be secured by expanding the TPP or using the migration of the
TPV registered in the TPP.
• If the TPP where the selected TPV belongs is temporarily
changed to alarm state (exceeding the "Caution" or "Warning"
threshold) when balancing the relevant TPV, a message to that
effect is displayed in the [Balance Thin Provisioning Volume
(Check)] screen.
• If the [Set] button is clicked without selecting a TPV to be
balanced, an error screen appears.