Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
429
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5 Create IOA Mapping information.
■ To set using [Set Range]
Create IOA Mapping information for any sequential IOAs for the LCU of the OCLINK Port
or FCLINK Port.
(1)Select the [Set Range] radio button.
(2)Select start/end IOAs to create IOA Mapping information for sequential IOAs from the
list box.
(3)Enter the starting Logical Volume number in the text box for multiple allocations.
(4)Click the [Execute] button to create IOA Mapping information of IOAs and Logical
Volume numbers in the lower part of the screen.
If there is already IOA Mapping information, it will be replaced by the IOA Mapping
information specified in the above procedures.