Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
127
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ To select an individual iSCSI Host
(1)Select the domain to assign the relevant iSCSI Host from the iSCSI Host List using the
list box.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in
which the Resource Domains are registered using a Total Administrator account.)
→ The [Assign Resources (Check iSCSI Host Settings)] screen appears.
The Set Range setting is performed when there is at least one iSCSI
Host that satisfies the condition described in "Condition in which an
iSCSI Host can Assign to Domain/Change Assigned Domain" (page
109).
A list box is displayed for the Host Table where the Assigned
Domain can be changed. For Host Tables where the Assigned
Domain cannot be changed, domain information is displayed in
text format.
If the total number of iSCSI Hosts in the domain exceeds the
maximum number specified using the [Assign Numerical Resource]
function, an error screen appears.