Filter
Top Products
Appendix A Screen Details
> A.10 Create RAID Group
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
716
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.10 Create RAID Group
A.10.1 Create RAID Group (Initial) Screen
Set the information of the new RAID Group to be created.
■ RAID Group information to be created
● Displayed contents
• RAID Group#
RAID Group number allocated at creation is displayed in 3-digit hexadecimal.
The RAID Group number will be allocated among the vacant numbers in ascending order.
● Setting item
• RAID Group Name
In the text box, enter the name to assign for the RAID Group up to 16 characters in ASCII
code (0x20
– 0x7E).
RAID Group name can be omitted. The initial status is blank.
• RAID Level
Select a RAID level from the list box.
For the required number of disks for each RAID level, refer to Supported RAID Group
configuration.
- RAID0
- RAID1 (Default)
- RAID1+0
- RAID5
- RAID6
• Resource Domain
Select Resource Domain (0x00 – 0x07) to create RAID Groups from the list box.
Shared Resources (Share) and Resource Domains registered in the ETERNUS DX400/
DX8000 series are displayed as the selection items in the list box. If a Resource Domain
name has been registered, the Resource Domain name is also displayed.
The default setting
is "Share".
Setting an existing RAID Group name is not allowed.
When Resource Domains are not registered, or when logged on using a
Resource Domain Administrator account, the "Resource Domain" item
is not displayed.