Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
306
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
→ The [Set CA Parameters (FC-CA Detailed Setting Check)] screen appears.
(2)Click the [OK] button.
→ The [Set CA Parameters (Updating Configuration Information)] screen appears.
When the process is successfully completed, the [Set CA Parameters (FC-CA
Detailed Settings Result)] screen appears.
Reboot PRIMEPOWER and SPARC Enterprise servers immediately
if the Loop-ID is changed while the server is running. If the
PRIMEPOWER or SPARC Enterprise not rebooted, warning
messages or system crashes may occur.
• By clicking the [Host Response List] link in the [Affinity Mode], the
Host Response List can be checked.
• By clicking the [Host Response No.] link on the [Set CA
Parameters (Host Response List)] screen, the settings of the
selected Host Response will be displayed.
• Details of the sense code conversion can be checked from the
[Detail] button of the Sense Code Conversion Pattern.