Filter
Top Products
Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
112
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Change the Assigned Domain of the RAID Group, and click the [Set] button.
■ To set using [Set Range]
(1)Enter the first and last RAID Group numbers.
(2)Select a domain to assign the specified range of the RAID Groups from the list box.
(3)Click the [Execute] button.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in
which the Resource Domains are registered using a Total Administrator account.)
If the [Execute] button is clicked in the following conditions, an error
screen appears.
• Both or one of the "From: RAID Group#" or "To: RAID Group#"
field is blank
• Characters other than hexadecim al numbers ar e specified in the
"From: RAID Group#" or "To: RAID Group#" field
• There are no RAID Groups where the Assigned Domain can be
changed in the range specified by the "From: RAID Group#" and
"To: RAID Group#"
The Set Range setting is performed when there is at least one RAID
Group that satisfies all the conditions described in "Conditions in
which a RAID Group can Assign to Domain/Change Assigned
Domain" (page 108).