Filter
Top Products
Chapter 5 Configuration Menu
> 5.4 Host Interface Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
312
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
(3)Click the [OK] button.
→ Returns to the [Set CA Parameters (Initial)] screen.
■ For iSCSI-CA detailed settings
(1)Select the following items and click the [Set] button.
[TCP/IP Setting]
- IP Address (required)
Specify the IP Address of the iSCSI-CA Port.
- Subnet Mask (required)
Specify the subnet mask of the iSCSI-CA Port.
- Gateway
Specify the gateway of the iSCSI-CA Port.
- iSNS Server
Specify ON (Enabled) or OFF (Disabled) for the iSCSI-CA Port iSNS server.
When ON (Enabled) is selected, it is necessary to set the IP address of the iSCSI-
CA Port iSNS server.
• Clicking the [ping] link of the [IP Address] field enables you to
check if the IP Address is assigned properly or if the
connection path to the destination device is operating normally.
After entering the destination device IP Address for which you
wish to check the connection status in [Ping IP Address] and
specifying the number of "Ping" commands to execute in [Ping
Count], click the [Execute] button ([Set CA Parameters (Ping
Setting)] screen).