Filter
Top Products
Chapter 6 Settings Menu
> 6.3 Advanced Copy Settings
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
460
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.3.3 Stop EC/OPC Session
This function displays the status of processing Equivalent Copy (EC) and/or One Point Copy
(OPC), and stops the selected EC/OPC sessions.
"Session" is a unit of the copy request. Use this function when the session cannot be stopped
due to host failure.
The following explains the operating procedures to Stop EC/OPC Session.
Procedure
1 Click [Stop EC/OPC Session] under the Advanced Copy Settings in the
[Settings] menu.
→ The [Stop EC/OPC Session (Initial)] screen appears.
Refer to "A.6.1 Advanced Copy Status (EC Session List) Screen" (page 688), "A.6.2
Advanced Copy Status (OPC Session List) Screen" (page 690), and "A.6.3 Advanced
Copy Status (EC Session Details/OPC Session Details) Screen" (page 693) for screen
details.
• When there is no EC/OPC session, a message to that effect appears.
Click the [OK] button to return to the [Menu] screen.
• When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, the displayed EC/OPC sessions differ depending on the
current user account.
- When logged on using a Total Administrator account, all the EC/OPC
sessions that are currently performed in the ETERNUS DX400/
DX8000 series are displayed.
- When logged on using a Resource Domain Administrator account,
EC/OPC sessions that are currently performed in the ETERNUS
DX400/DX8000 series, in which the copy sources or the copy
destinations are volumes listed below, are displayed.
• Volumes that are assigned to the relevant Resource Domain
• Volumes that are assigned to the Shared Resource
• Volumes that cannot be assigned to a Resource Domain
(Mainframe Volumes)