Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
161
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
4 When adding disks to the RAID Group, select the checkboxes of the disks that
are to be used, and click the [Set] button.
To remove disks from the RAID Group, deselect the checkboxes of the disks that
are no longer required, and click the [Set] button.
Only disks that can be used will have checkboxes.
Only blue LED disks(*1) can be added, and only green LED disks(*2) can be deleted.
*1: Disk not currently assigned to any RAID Group or REC Disk Buffer.
*2: Disk assigned to the RAID Group before the LDE.
Click the [Move] button to display the Expansion Rack screen. Select the Expansion Rack
disks using the same procedure as for the Base Rack
→ The [Logical Device Expansion (Setting Check)] screen appears.
Check the following when select the disks.