Filter
Top Products
Chapter 5 Configuration Menu
> 5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
219
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
2 Select volumes to perform migration, and click the [Set] button.
→ The screen to be displayed differs depending on whether the RAID Group or TPP can
be selected as the migration destination.
• When RAID Groups and TPPs can both be selected as the migration destination:
→ The [RAID Migration (Select Migration Destination Type)] screen appears. Move on
to Step 3
.
• When only RAID Groups can be selected:
→ The [RAID Migration (Select Migration Destination RAID Group)] screen appears.
Move on to Step 4
.
• When only TPPs can be selected:
→ The [RAID Migration (Select Migration Destination Thin Provisioning Pool)] screen
appears. Move on to Step 6
.
3 Select the migration destination type, and click the [Set] button.
→ The screen to be displayed differs depending on the selected migration destination
type.
When the [Set] button is clicked in the following conditions, an error
screen appears.
• When no volumes are selected
• When no RAID groups and TPPs can be selected as migration
destinations