Chapter 6 Settings Menu
> 6.8 Others
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
594
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3 Click the [OK] button.
→ The [Set IP Address for USER Port (Setting Result)] screen appears.
- When the Network Address of IP Access Settings and the IP
Address for [Set IP Address for REMCS Port] are in the same
subnet
- When the Network Address of IP Access Settings for [Set IP
Address for REMCS Port] and the IP Address are the same
- When the Network Address of IP Access Settings for [Set IP
Address for REMCS Port] and the IP Address are in the same
subnet
- When entering characters other than numeric characters, or a
value other than the range of the HTTP Port No. (other than 1
to 65535)
- When entering a number that has already been used for the
ETERNUS DX400/DX8000 series, such as "23", "443",
"1999", or "1372" for the HTTP Port No.
Not only the [Network Address] but also the [IP Address] can be set
in the IP Access Settings.