Fujitsu DX400 Computer Drive User Manual


 
Chapter 2 Logon/Logoff
> 2.1 Logon
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
38
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
The following explains the logon procedures.
Procedure
1 Enter [User Name] and [Password] on the logon screen and click the [Logon]
button.
[User Name] and [Password] differ, depending on the account type.
The default system administrator user name and password are as follows:
User Name: root
Password: root (Default)
For details on general user accounts, refer to "9.1.1 Set User Account" (page 645).
An error will occur, if logged on in the following situations. Check the
error message first, and either forcibly log off all users, or wait and retry
logon later.
- When the last operation was terminated without logging off.
- When a system administrator or maintenance engineer has already
logged on.
- When another application is already logging on.
The starting screen of the ETERNUSmgr differs depending on the
language setting of the browser. To switch to Japanese mode, click the
[Japanese] button. To switch to English mode, click the [English] button.
Refer to the "9.1.2 Set Role" (page 655)
menu for allowed functions for
each role. The [Set Role] function can be started up when logging on
with a user account which has default role [account] or category
[Account Settings].
If an input error screen appears, enter user name and password
again to perform the logon operation.
When RADIUS Authentication is used, an input error screen appears
if authentication fails.
Items Description
Jumps to the English Logon screen of ETERNUSmgr.
All the screens after logon will be displayed in English.
Jumps to the Japanese Logon screen of ETERNUSmgr.
All the screens after logon will be displayed in Japanese.