Filter
Top Products
Chapter 2 Logon/Logoff
> 2.1 Logon
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
40
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
■ When there are no other users logged on
→ The [Menu] screen is displayed.
■ When attempting to log on, another system administrator, maintenance engineer, or
application is already logged on.
→ The [Logon (Forcible Logon)] screen appears.
To forcibly log off other users in order to logon, click the [OK] button to continue the logon
operation.
• When the ETERNUS DX400/DX8000 series is under
maintenance work, a message to that effect appears. Clicking the
[Cancel] button displays a message such as "Under
Maintenance". Log off from the ETERNUSmgr and wait until the
maintenance operation is complete.
• When the ETERNUS DX400/DX8000 series is being set up, a
message to that effect appears. Clicking the [OK] button displays
a progress report. Wait until the setup procedure is complete. If
the [Cancel] button is clicked, ETERNUSmgr does not produce a
progress report. Click the function menu link. If the same
message appears again, click the [OK] button. No other menu
can be executed until the setup procedure completes.
• When the ETERNUS DX400/DX8000 series is under
maintenance work or being set up, device status may be checked
by clicking the [Device Status], [RAID Group List], or [Volume List]
links.
The other users will not be notified that another user forcibly logged
on.