Filter
Top Products
Chapter 5 Configuration Menu
> 5.3 Thin Provisioning Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
298
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5.3.19 Register Thin Provisioning License
The Thin Provisioning License can be registered in the ETERNUS DX400/DX8000 series.
Thin Provisioning is an optional function offered for the ETERNUS DX400/DX8000 series. It is
necessary to buy a license to use Thin Provisioning. By purchasing this license, the "License
Label" can be obtained.
The license information on the label can be registered to the ETERNUS DX400/DX8000 series
using the [Register Thin Provisioning License] function. When this registration is completed suc-
cessfully, the customer can use the Thin Provisioning function.
This section describes how to register the Thin Provisioning License.
Procedure
1 Click [Register Thin Provisioning License] under the Thin Provisioning
Management in the [Configuration] menu.
→ The [Register Thin Provisioning License (Initial)] screen appears.
2 In order to register the Thin Provisioning License, set the following items and
click the [Set] button.
• MODEL
Enter the MODEL (Model Name) of the license number.
• SER No.
Enter the SER No. (Serial Number) of the license number.
• CC
Enter the CC (Check Code) of the license number.
→ When the [Register Thin Provisioning License (Updating Configuration Information)]
screen appears and the operation completes successfully, the [Register Thin
Provisioning License (Setting Result)] screen appears.
If the "Thin Provisioning License" is not registered, the Thin Provisioning
function is not available.
When the license has already been registered, a message to that
effect is displayed. Click the [OK] button to return to the [Menu]
screen.