Filter
Top Products
Chapter 6 Settings Menu
> 6.5 Eco-mode
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
538
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6.5.4.2 Manual setting of Eco-mode schedule in the Thin Provisioning Pool
This section describes operating procedures for manual setting of Eco-mode schedule in the
Thin Provisioning Pool.
Procedure
1 Click [Set Thin Provisioning Pool-Eco-mode] under the Eco-mode in the
[Settings] menu.
→ The [Set Thin Provisioning Pool-Eco-mode (Set)] screen appears.
Refer to "A.31.1 Set Thin Provisioning Pool-Eco-mode (Set) Screen" (page 793) for
screen details.
2 Specify the following items in the Thin Provisioning Pool to set the Eco-mode
schedule from the [Thin Provisioning Pool List].
• [Eco-mode Schedule (ON/OFF)] check box
Select ON/OFF of the Eco-mode schedule to be set.
• [Eco-mode Schedule (Schedule)] list box
Select the Eco-mode schedule to be specified.
When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, only the Eco-mode schedules that are assigned to
the same Resource Domain as the relevant TPP, and only the Eco-
mode schedules that are assigned to the Shared Resource, are
displayed in the list box.